Inicio > Hardware > Nuevo firmware 1.00.12 para el router Linksys WAG160N

Nuevo firmware 1.00.12 para el router Linksys WAG160N

Miércoles, 18 marzo 2009 Deja un comentario Go to comments

Hola,

si hace unos días os comentaba de la existencia del firmware 1.00.10 para el router Linksys WAG160N, nos enteramos gracias al aviso de un lector del blog (gracias chapuzasrod) de que ya está disponible la versión 1.00.12.

1012

Es curioso ver como en pocos días han sacado varias versiones del firmware, imagino que para corregir algún error grave de las versiones que sacaron. También es curioso ver como en el changelog aparece una versión 1.00.11.

El changelog de la 1.00.11 y de la 1.00.12 es el siguiente:

1.00.12
1. DownloadSpeedTest(), DUT web UI(port 80) will be inaccessible if set buffer size to a large number
2. v1.00.11, Wireless, Fail to find wireless SSID after set WPA password with "linksys" (7 chars)
3. GetWLanRadios() cannot return correct WideChannel information
4. GetDeviceSettings2() will return wrong country code for United Kingdom.
5. Fix bug that SIP call can not be initialized from WAN to LAN if the SIP
   Invite packet of the SIP Server doen't include port information.
6. Atheros drivers changelist from 6.1.1.98 to 6.1.1.111:
   - Add FCC6 for Australia and Canada 5GHz.
   - Fixed problem in broadcast performance.
   - Disabled power constraint element when country IE is enabled on 2.4GHz
     channels since some stations will misunderstand the Power Constraint
     element and cause tx power to be set incorrectly.
   - Re-enabled 11n NF periodic Calibration.
   - Fixed a problem where STA cannot reassociate to AP after beacon stuck &
     HW reset.
   - Enhanced dynamic allocation of TID buffers on ADDBA.
   - Fixed throughput degradation issue during downstream TCP legacy
     co-existence tests.
   - Addressed multiple BSSID performance issue.

1.00.11
1. GetPortMapping always returns an extra HEX value 0x10 in field
2. Disable QoS if user select Auto mode but didn't add any rules
3. Update wireless driver to 802_11-6.1.1.111
4. HNAP:DownloadSpeedTest accept invalid data
5. WAG160Nv1-EU-ANNEXA-ETSI-1.00.07(02)-code :GetDeviceSettings: Always get a NULL Device name :  <DeviceName></DeviceName>
6. HNAP SetRouterSettings: FW should not check remote management port if remote management is disabled, CBO, HNAP
7. HNAP SetWanSettings: FW allows a broadcast gateway address 12.254.169.255, CBO, HNAP
8. HNAP SetMACFilter2: FW allows a multicast MAC address FF:0B:DC:6F:FE:01, CBO, HNAP
9. HNAP SetMACFilter2: FW allows duplicated MAC addresses, CBO, HNAP
10. HNAP SetWanSettings: FW accepts blank PPPoE username with non-blank password, CBO, HNAP
11. Web administrator username should be case insensitive, CBO, username
12. FW writes settings back to flash when doing HNAP Getxxx actions, CBO, HNAP
13. HNAP SetWlanRadioSettings: FW returned "ERROR_BAD_WIDTH" when setting channel bandwidth 40, CBO, HNAP
14. DUT accepted all kinds of values from HNAP setDSLSettings request without verifying them first. DUT responsed "OK" to HNAP setDSLSettings request, which contains ilegally "xxx" as multiplexing value. DUT should reject this value with "ERROR" response. Same problem is with all other parameters in setDSLSettings request.
15. AddPortMapping takes invalid dataparameters in setDSLSettings request.
16. WAG160Nv1-EU-ANNEXA-ETSI-1.00.07(02), MAC SetupWinzard v4.9.8074.1, HNAP-GetWLanRadioSecurity:Set WPA/WPA2 key as all printable punctuations, but DUT reply error response when GetWLanRadioSecurity.It's a firmware bug.
17. Fix Bug upnp sometimes can not work
Anuncios
Categorías:Hardware Etiquetas: ,
  1. Aún no hay comentarios.
  1. No trackbacks yet.

Responder

Introduce tus datos o haz clic en un icono para iniciar sesión:

Logo de WordPress.com

Estás comentando usando tu cuenta de WordPress.com. Cerrar sesión / Cambiar )

Imagen de Twitter

Estás comentando usando tu cuenta de Twitter. Cerrar sesión / Cambiar )

Foto de Facebook

Estás comentando usando tu cuenta de Facebook. Cerrar sesión / Cambiar )

Google+ photo

Estás comentando usando tu cuenta de Google+. Cerrar sesión / Cambiar )

Conectando a %s

A %d blogueros les gusta esto: